|
NetDominium Blade SBI-7126T-T1L |
| Dual Intel 5500 series Xeon Quad/ Dual-Core, with QPI up to 6.4 GT/s and 95W Intel 5500 (Tylersburg) Chipset Up to 48GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 12GB Unbuffered DIMM Intel 82576 Dual-Port Gigabit Ethernet 2 x 3.5" Hot-Plug SATA Drive Trays 6. Integrated Matrox G200eW Graphics |
|
|
| | | SBI-7126T-T1L | - Processor Blade SBI-7126T-T1L (Black)
|
| | |
| | | CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5500 sequence (Nehalem-EP processor)
- NOTE: Support processors up to 95W
| | QPI | |
| | |
| | | Memory Capacity | - 6x 240-pin DIMM sockets
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 12 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | | Chipset | - Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1 support
| | IPMI | - Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
| | Network Controllers | - Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
| | Super I/O | | | Clock Generator | |
| | |
| | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | | | |
| | | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | | Buttons | - Power On/Off button
- KVM button
| | LEDs | - Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
| | Connector | - SUV (Serial/USB/Video) & KVM Connector
|
| | |
| | | Hot-swap | - 2x 3.5" SATA Hot-swap drive bays
|
| | |
| | | KVM | - 1 Front Connector for Supermicro KVM Card
|
| | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| | |
| United States / Canada | - FCC- Emissions (US) Verification
| | Europe | - EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| | |
| United States / Canada | - UL60950-1 - CSA/CUL 60950-1
| | Europe | - EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
|
|
|